Although the best option is to go to an expert, sometimes it is impossible, that’s why how to remove acrylic nails quickly and easily at home and without hurting you.
Acrylic nails are in fashion, not only because they are an excellent alternative for girls who were not blessed with very feminine fingers, but because with them we can show impeccable hands forever.
How to remove acrylic nails quickly and easily at home without acetone
Due to the coronavirus quarantine, all beauty salons are closed, so many girls who have these nails have not been able to remove them, much less do maintenance.
Ingredients
- Acrylic nails on your hands without maintenance
- A huge desire to take them off
Implements necessary
- a smooth file
- Nail clipper
- A coarse file for hard-grit nails
Time required
45 minutes
Estimated cost
$8000 (COP)
Acetone-free procedure
1. Cut
It is best to cut your acrylic nails before performing the removal procedure to prevent them from breaking and/or lifting. You must pay close attention not to cut your natural nail, only the acrylic.
2. File
If you have acetone you can use it, but if not, practically the entire procedure will be done with a file tip. You must start, then, to file with the coarse file on the nail to remove the shine and reduce the thickness of the acrylic.
It is very important that you do not remove all the acrylic so that your nails are not too sensitive; file to a point where you feel there is still a light layer of this material left.
3. Polish
With the soft file, file just where your acrylic nails meet the natural ones, to try to unify their texture and level.
4. Strengthen
When your acrylic nails have been flat and smooth on the natural ones, you can apply a strengthening nail polish.
This is how you should remove acrylic nails at home with acetone
If you have acetone or acetone nail polish remover at home, you can also remove the acrylic from your nails, but the procedure is different.
Ingredients
- Acetone or nail polish remover with this ingredient
Implements necessary
- Nail clipper
- Aluminum foil cut into 6 x 6 cm squares (approximately 10 pieces)
- Cotton
Time required
30 minutes
Estimated cost
$13500 (COP)
Process
1. Cut
Cut your acrylic nails with the nail clipper without cutting your natural nails; you can see them by looking closely at the ends of your fingertips.
2. Assemble the nail covers
Take the cotton and take out 10 flat pieces of approximately 3 x 3 cm; soak them in nail polish remover or acetone and place them on each piece of aluminum foil.
3. Cover
Now cover your nails with the nail covers that you put together in the previous point; take care that the cotton is right on each one of them. Leave on for 20 to 25 minutes. If you use pure acetone, 10 minutes.
4. Withdraw
The nail polish remover or acetone melts the acrylic, so that after the time you waited, it should come off with the cotton. If not, you can let it act a little more, but checking every 3 minutes.
Do you consider yourself more audiovisual?
We share you in a very useful video; remember, this is a very delicate procedure, if you do not do it to the letter or you feel insecure, it is better not to carry it outWe don’t want you to end up hurt.
To help you, we consult the expert and nail technician Natalia González, who explained the step by step in great detail; In addition, she also gave us some tips for girls who have semi-permanent nail polish.
Share it!
Also, tell us what other beauty tips you would like us to investigate for you, we will gladly do so!