If the lower part of your iron is starting to look tired – or already burned – then it probably urges you to know How to clean a iron … without burning your fingers in the processpreferably. Do not fear; This is a totally possible feat. With the right method, you can restore the lower part of your iron and, in turn, keep it working as effectively as the first day you bought it. Keep reading to discover 11 tips on how to clean a ironwithout the need for extra -expensive cleaning products.
1. Dissolve Tylenol in a hot plate
One of the best tricks for Clean a iron with burned waste It is quite unexpected: Tylenol. It is not necessary to be branded, any paracetamol tablet serves. Turn on the iron in the highest position. When hot, press the pill directly on the burned area. The pill will melt and will become a gel that will dissolve the burned area. Use a wet cloth or paper towel to clean the sole, and repeat the operation if necessary until carbonization has been completely removed.
It is important to protect your fingers, of course, so Use a baking glove or gloves that protect heat When you use this method. Please do not try to hold the pill with some pliers or tweezers: a slip and will end up scratching the iron, and that has no arrangement. Simply put something to protect your hands and you should be fine.
2. Create a paste to clean the iron with sodium bicarbonate
Sodium bicarbonate is a miraculous product that cleanses everything, from the ovens to dishwasher. You can also clean your iron. Create a paste to combat spots with only two tablespoons of sodium bicarbonate and a tablespoon of water. Frót it carefully over the iron, but ensures that bicarbonate does not enter the steam holes. If the pasta enters the steam holes, be sure to clean them … which leads us to Next advice to clean the iron.
3. Use a cotton swab to clean steam holes
Cotton sticks are the perfect tool for Reach inside the steam holes and clean them. Immerse them in distilled white vinegar before introducing them to increase the power to fight dirt.
4. soaks a vinegar towel
Another way to use the vinegar to clean along the plate plate is to soak a cloth in vinegar and then place the iron on the towel with the plate down plate. Let it rest on the cloth in vinegar for 30 minutes and clean it. Like new! This method is especially useful if your iron has corrosion.
5. Add vinegar to the water tank
If you have a steam iron, another way to clean the steam ducts of the plate is to fill the water tank with A mixture of half of distilled white vinegar and half water. Then take a rag or an old towel, and iron and vaporize. As you are steaming, the waste will leave the ventilation grilles along with the vinegar.
6. Do magic with a magical draft
A magical draft can do wonders on a plate, especially if Your iron has hard water spots. Wet the magical draft and then rub the cold iron along the sponge until the spots disappear. The sponge wets again if necessary.